How to draw:                                         how to draw chibi food

1.chimera=                                              how to draw chibi pokemon   

- STEP 1.                                                                                       http://www.dragoart.com/

I'm going to give you a few tips first off. We'll start with the goat head. I've given you two different views of a goat head as well as a close up reference on the eyes.

-STEP 2.

I've done the same for a lion head, including showing you how the lion's mane comes down off of his head.

 

-STEP 3.

I've also done the same thing for the dragon's head.

-STEP 4.

Here I show you the shape of the lion's front leg and how the paws are shaped.

-STEP 5.

And here is what a goat's leg looks like from a couple different views as well as the shape of the hoof and where it splits.

-STEP 6.

I'm going to show you how to draw the base in a few steps because this is a very complicated critter and you want to make sure you get everything in the right place. We're going to start with just the main body; the torso and shoulders, the hips and rear legs.

-STEP 7.

Then we'll put in lines for the wings, along with the front legs. We'll draw a long curving line for the tail and end it with a circle, and putting down a cross map as if we were going to draw a face here... because we are.

-STEP 8.

Then we'll draw in the shapes for each head, from left to right, goat, lion, and then dragon and then drawing lines to connect them to the shoulders and chest.

- STEP 9.

We'll draw the goat's head first, starting with the shape of the head and then moving to the features of the face and beard. From there we'll draw the neck and lastly we'll draw in the horns.

-STEP 10.

We'll start with the shape of the lion's head next along with his mouth and his nose. From there we'll draw in all his sharp pointy teeth along with the inside of his mouth and the part above his upper lip. Then we'll draw in his eyes and his brows and all the folds in his skin around them. Next comes the ears and then lastly we'll draw in his mane.

-STEP 11.

Next we come to the dragon's head. doing the same and starting with the shape of his face first along with the shape of his nose and his mouth. We'll draw in the cheek lines and the eyes in next and the ridges from the scales along his nose. We'll do the fin along his spine next along with along with the neck and the spikes coming off the cheeks. Lastly we'll draw his horns and the ridges on the neck.

-STEP 12.

After we have all the heads drawn, we'll start on the front legs, bringing one paw up and putting the other out as if he's trying to stabilize himself while flying.

-STEP 13.

Then we'll draw in the chest and bring the lines down to draw the torso.

-STEP 14.

From there we'll draw the his hind legs, drawing them a little hairy looking with some hairs sticking down and out from the joints. Also make sure to end each leg in a hoof.

-STEP 15.

We'll bring the tail down and around and draw the shape of our snake head at the end of the tail. We'll add a few groupings of scales along the tail as well.

-STEP 16.

We'll draw out the face of the snake next, drawing the fangs and inside of the mouth along with the eyes.

 

-STEP 17.

Lastly we'll draw the wings, bringing them up and around the body.

-STEP 18.

And there you have it. Your very own chimera!

 

2.sea creature=

-STEP 1.

Make two circles, one for the head and the other for the body. Draw a long curved neck line and then another for the tail.

-STEP 2.

Now you will sketch the front part of the snout for the creature like so, and then make the lining of the under bite that exposes the sharp looking teeth.

-STEP 3.

You will now need to sketch out the actual structure of the face by drawing out the jawline. The pointed chin also needs to be drawn, and then draw the marks or gum line for the teeth. Next, draw in the creatures oblong sized eye, color in the eye but leave a shape for the eyeball. Lastly, lightly sketch in some marks and scales on the face for added texture detailing to the skins surface.

-STEP 4.

Next, begin drawing out the fin like horns for the sea creatures head and formation. The lining along the edges needs to be uneven and notched.

-STEP 5.

In this step you will be drawing out the entire body of the sea creature. Start under the head and begin drawing out the neck, then move forward to sketching out the chest, back, belly, and tail. Before leaving this step you have to draw the fins and like the head fins the edges need to be notched and rugged.

                     

-STEP 6.

You really need to take your time as you sketch out the sea creatures neck, back and and tail fins or frills. The edges are also very rugged and they also have some pointed tips. Sketch in some rib lining and then move to step seven where you will be finishing off this sea creature.

-STEP 7.

Okay guys you have come to the last step. As you can see you will be adding the texture detailing on the skin of the creature. But before you do this you have to clean up the mistakes and guidelines that you drew in previous steps. When you are done, start sketching in the scales, pattern on the skin, and then draw the other fin.

-STEP 8.

Here is what your drawing of a sea creature looks like when you are done. Color in the beast like so, and show off your skills to anyone that will look.

 

3.kirin=

-STEP 1.

Begin by making two shapes, one for the head and the other for the body. Connect the two shapes with a neck line which should also be made in the position the neck will be in.

-STEP 2.

Next, start drawing your kirin from the side starting with the ear, then make the shape of the face including the snout and horn. Once that is done draw the long curved neck which then turns into the chest. With a new stroke, draw the first leg but make sure the end of the hoof has long hair flowing from it.

-STEP 3.

We will continue to work on one side of the kirin's body by drawing the length of the mane. Notice how it touches the ground. Draw the wavy long hair like you see here, then draw the other front leg as well as the hoof. Before you leave draw a thick, bold lined eyelid then make the shape for the eyeball. Add a nostril then you're done.

-STEP 4.

We will finish drawing the kirin's body excluding the tail. Make the wavy pattern for the back part of the mane, then draw the back, butt, and hind legs. The hair should also flow off the bottom of the hooves like the front legs.

-STEP 5.

Finish off this fantasy figure by drawing the crimped flowing long tail, then add all the strand detailing on the mane and tail. Draw a hoof as well as the toe lines. Erase the mistakes you made before you leave this step.

-STEP 6.

Now that you're done you can start coloring in your kirin that you just created. I hope you had fun, as well as enjoyed this lesson on drawing a kirin for kids style.

 

4.cemberus=

-STEP 1.

Begin with making two simple shapes, one for the head and another for the body. Add a connecting line which is the frame for the neck like so.

-STEP 2.

In this step you will draw the side profile of the first head of the cerberus. These animals look a lot like dogs or even wolves. Make the forehead, snout, jawline and then the ear. The back of the neck should be fluffed up as well.

-STEP 3.

Make the lining for the front part of the neck, then draw the arched back as well as the hind leg and front leg. The front and back paws are to be rounded and squared.

 

-STEP 4.

Okay guys, you are now ready to draw the rest of the heads and since this is a three headed beast, you will only need to draw three heads. Make the fluffy chest, as well as the other visible leg. Draw the tail then proceed on.

-STEP 5.

Make the ears then draw the eyes. Sketch in the noses on all three heads and you are all done. Add the lines for the paws too. Erase the mistakes than all is finished.

-STEP 6.

Here is your cerberus for kids when you are all done. Now you can get busy coloring in your three headed dog or beast.

5.cute mashmellow=

-STEP 1.

Draw one marshmallow shape for the first step like so, and I'm sure none of you will have a problem making this shape.

-STEP 2.

Draw the other marshmallow and instead of making a whole piece, just draw the shape with the back end missing

-STEP 3.

Draw a dip at the top of the marshmallow and then draw in the first face. This consists of eyes and a mouth.

-STEP 4.

For the last drawing step you will repeat what you just did in step three, and be sure to color in those jellybean shaped eyes. Draw a mouth and erase any mistakes.

-STEP 5.

Now that you are done, you have a complete drawing of two cute marshmallows that are to die for. I hope you liked this lesson in a small way.

 

--- sff---

----------------------------------------------------------------------------

6.red bird chibi(angry bird)=

-STEP 1.

The first thing you want to do is draw a thick circle shape then sketch in some facial guidelines.

-STEP 2.

Using that shape, draw out the body, then draw the two thick feathers on the head.

-STEP 3.

Draw out a simple tail which is just three thick lines joined together in a flaring pose.

 

-STEP 4.

Next, draw the large, thick, bold, wide V for the expressive eyebrows which makes this bird look angry.

-STEP 5.

Sketch out the large eye shapes like so, then draw in the small beak which also has a mean or angry look.

-STEP 6.

Color in the wide eyeballs, then add your stomach lining for the two toned look. Erase the mistakes if you made any folks.

-STEP 7.

Here is the finished drawing when you're done. Color in this angry bird to bring it to life.

7.green bird chibi(angry bird)=

-STEP 1.

Make a dew drop shape like you see here for the body guide of your green Angry bird in chibi form.

-STEP 2.

Simply draw out the shape of the body just by going over the shape you just made in step one.

-STEP 3.

The next thing you will do is draw out the beak which is open. The beak sort of looks like a scissor, so keep that in mind when you tackle this step.

-STEP 4.

Draw the belly lining like so, then add detailing inside of the beak.

-STEP 5.

Draw in the feathers on the top of the head, as well as the tail feathers.

 

-STEP 6.

Now you will draw out the long eyebrow which thickens at the end. When that is done draw out the actual shape of the eye.

-STEP 7.

Color in the pupil, then you're done. If there was any mistakes made through out the drawing process, erase them now.

-STEP 8.

Here is your green colored Angry bird in chibi form. Color it in and you're done

 

----------------------------------------------------------------------------

8.stegosaurs=

-STEP 1.

Make a circle for the head, and then draw out a neck line that connects to an egg shaped body. You will then draw out a face guide.

-STEP 2.

Now you will be sketching out the shape of the head, and bottom jaw that makes a mouth smiling.

-STEP 3.

Draw out the dinosaur's eye, and then draw in the eyeball. You will then draw a slice for the nose hole and then draw out the marking line on the mouth to represent the hard lines texture.

 

-STEP 4.

Now is the time that you will be drawing out the body of this adorable dinosaur. Start with the thick stubby looking neck, and then draw out the chest, belly, and then both the front and hind legs. You should also add some crease or folds at the ankles of the back foot.

 

-STEP 5.

You will finish drawing the rest of the dinosaur's body by making the tail. Next, draw out the rest of the legs, and then draw in the toe nails on each foot.

-STEP 6.

Finish this drawing by sketching out every plat like bone that starts behind the head, and travels down the neck, back, and tail. At the tip of the tail draw in three spikes and then start cleaning up the drawing for completion.

-STEP 7.

Here is what your cute drawing of a stegosaurus for kids looks like when you are done. Now you can color in this dinosaur, and add it to your drawing collection.

----------------------------------------------------------------------------

9.chinese dragon=

- STEP 1.

First off we're going to start with a frame for our dragon, we'll make a long winding line with three ovals. One for the head, one for where the arms will come out and another for the legs.

- STEP 2.

Then we'll draw the shape of the head and the general shape of the face.

- STEP 3.

Now we'll draw out the pupils, and the dragon's eye whiskers and give him some scales, spines and some horns.

- STEP 4.

Now we'll start drawing out the body, coming down from the neck and bringing it down and a round.

- STEP 5.

We'll stop so that we can draw on the forelegs before continuing on with the rest of the dragon's body.

- STEP 6.

We'll continue on with the body and bring the lines up and around.

- STEP 7.

Now just like the front legs, we're going to stop and add the hind legs.

- STEP 8.

Now we'll bring the tail down and around, curling it back at the end.

- STEP 9.

Then we can add the rest of the spines, scales on both the body and the underside and add some hair at the end of the tail.

- STEP 10.

And there you have it. A chinese dragon for kids. I hope you enjoyed this tutorial.

10.demiveemon=

-STEP 1.

Draw circle for his head and two circles for his eyes. Draw a circle for his body and two ovals for his legs and then three swirled lines for his ears and tail.

-STEP 2.

Draw on his eyes first and then draw on his mouth. And then draw the rest of his head and then his ears.

-STEP 3.

Draw on his little and then draw on his beginning of the leg and then rest of his body.

 

-STEP 4.

And then finish drawing on his leg.

-STEP 5.

And finally draw on his tail and ur done.

-STEP 6.

Now that your done you can color it :DDDD Don't let this little guy go with out color O.O

 

----------------------------------------------------------------------------

11.gabumon=

-STEP 1.

Are you ready to get busy and draw Gabumon? Good, let's get started. First draw a circle for his head, and then draw out the shape of the body, and long ape like arms. Lastly, add the guidelines for the face.

-STEP 2.

Now start drawing out the shapes for the eyes, nose, and mouth line. The ends of the eyes flare out like flames. Color in the nose, and then move to the next step.

-STEP 3.

Gabumon is a very unique looking Dgimon because when he digivolves, his face looks like there is a mask hanging over the real face. You will now begin sketching out the actual shape of his head, and then draw in the pushed back ears that are very pointed. There really isn't too many sharp edges to this Digimon's design, which makes him pretty easy to draw. Once the ears are drawn, you can then draw the horn that is piercing out from his forehead, and then add some eyeballs, and colored pupils. Draw two tiger like stripes on his top jaw, and then move to the next step.

-STEP 4.

Now you can sketch out the big gorilla like arm shapes, and at the ends they sort of look like wooden mallets. Draw the claws at the tips, and then draw the belly. Once that is complete you can sketch in the tiger stripes on the arms like you see here.

-STEP 5.

For your last step all you have to do is draw four sharp looking teeth on each side of the mouth, and then draw the back legs, and stomach design on this Digimon's belly. Erase the lines and shapes that you drew in step one, and you are now done.

-STEP 6.

This is how your drawing looks when you are done. Get out your markers, crayons, paint, or colored pencils to start shading in your character that you just drew. Wasn't drawing a Digimon fun?

----------------------------------------------------------------------------

12.veemon=

-STEP 1.

Draw a circle for his head and a oval for his mouth/muzzle.Now draw 4 more circles for his body his hands and his legs.Next draw on the half an oval feet base then draw on the curved lines for his ears and tail.

-STEP 2.

Draw on his mouth/muzzle first then draw on his eyes.Next draw the rest of his head on and his ears.Don't forget his eye mark and forehead mark :).Draw on his arm and his fist then work you way back up by drawing on part of his leg and his body. Lastly draw on his other arm and his hand with his claws.

-STEP 3.

Start drawing on the beginning of his leg and then finish his leg off with he's footsie ^_^ then draw on his other foot :DDD

-STEP 4.

Lastly draw on his tail and any other details you may have missed or forgotten :))))))

-STEP 5.

YAYYYYYYYY ur done :DDDDD Now if ya want you can color it :3 I hope you enjoyed this tut.

 

STEP 5.

13.hydra dragon=

-STEP 1.

Let's get started. You will need to draw out a series of shapes and guidelines for a workable body frame for your hydra. Make three egg shapes for the heads, then add the facial guidelines. Next, make the shape of the body, then add the tail and neck lines like so.

- STEP 2.

We will tackle one head at a time when drawing the hydra faces. Start with the muzzle. Draw out the very sharp edged facial structure. The bottom jaw should overlap the top jaw. Make the brow bone or bump.

- STEP 3.

Finish the head by drawing out the horns like so. As you can see the ends or tips of each horn have a tapered point. Sketch out the eye, as well as the gill like frills on the back part of the jaw. Sketch in detailing to the frills and forehead like so.

- STEP 4.

Since this is an end head and neck this hydra is going to have one of the shoulder sides. Sketch out the thick slightly bent neck, then draw the part of the back, shoulder, and muscle definition.

- STEP 5.

Start this step by drawing out the second head to this three headed beast. Tackle this task the very same way you started the process to drawing the first hydra head. The only difference will be the mouth. This hydra has a slightly open mouth.

- STEP 6.                 

Finish the rest of the head with the horns, frills and eye. Sketch in all the necessary definition and details.

- STEP 7.

Begin sketching out the neck starting at the back of the head. Draw the front section of the neck, then draw in the chest.

-STEP 8.

We will sketch out the chest of this beast, followed by the first front leg and foot, talon or claw. Be sure to sketch in all the muscle and hand definitions.

-STEP 9.

Draw the last two heads like so. take your time so they all look like they are part of the same beast. Make sure to draw out all the necks too. You don't want a floating head do you?

-STEP 10.

Slowly sketch out the entire back like which is also part of the tail. When that is done you can sketch out the belly and hind leg. Draw the contours of the leg, then add all the definition too.

-STEP 11.

Almost done guys. You will now take your time as you tackle the task of drawing the spiny frills that flows down the hydra's neck and back. When all the spikes are drawn, you can add detailing to the centers.

-STEP 12.

Draw in the rest of the limbs followed by the tail. The tail is actually drawn with some straight edges. Add the body definition, then you can begin erasing the mistakes as well as guides.

-STEP 13.

Add the neck and belly scales, then draw the bone etching on the horns. Add some minor detailing in the areas you see small spots of red.

-STEP 14.

Here is how your hydra comes out looking when you are all done. Of course not all of you will end up with a perfect drawing, but if you practice long enough, you will produce your perfect piece of art. I have still yet to draw mine.

14.pikachu ganggam style=

-STEP 1.

Make a circle for the head, then sketch in the facial guidelines. Draw and attach the body.

-STEP 2.

Using the guide you just made, draw out the shape of Pikachu's face. Draw in the long oblong ears before you leave this step.

-STEP 3.

Next, draw in the black sunglasses like so, then draw Pikachu's mouth, nose, and his cheek shapes. Add the lining to the tips of the ears like so, then you're done.

-STEP 4.

Draw out the body which looks like the stem of a mushroom. Draw in the small feet, then proceed to step five.

-STEP 5.

Draw the arms and hands which are crossed over one another. Draw in the tiger stripes on each of his body.

-STEP 6.

For the last drawing step all you have to do is draw the large bolt like tail. Erase the mistakes than you're done.

-STEP 7.

Now that everything is cleaned up, you can color in the drawing to finish him off.

----------------------------------------------------------------------------

15.zombie unicorn=

-STEP 1.

Draw two circles for the head and body like so. Add a face guide and then move to step two.

-STEP 2.

Begin sketching out the very boxy shape of the unicorn's head and face structure. As you can see the snout is small but strong looking and the horn is pointed and sturdy. Draw in the ears and then sketch in some hair on the head for its mane.

-STEP 3.

This zombie unicorn has a very strong emo type style for the face. Sketch in the long bangs from the mane, and then draw out each very dead, or lifeless eyes. Darken the areas under and around the actual shape of the eye and then add some detailing on the cheeks, ears, and snout. The muzzle of the unicorn is tied with a bandage wrap. Draw the lines on the horn and move to step four.

-STEP 4.

Now is the time to start drawing out the zombie unicorn's body. Begin with the neck, chest, and first front leg. There is no hoof as of yet, but there will be in later steps. For now, just draw in the spiked ankle shackle and make the spikes within it. Sketch out the loop from muzzle bandage and move to step five.

-STEP 5.

Draw in the other front leg and then make sure that there is a hoof peeking through the long leg hair, and then draw in a few gashes n the leg like so.

-STEP 6.

Draw out the back leg and hoof, and then sketch in more cuts and gashes to the top part of the thigh. Draw the belly line and sketch in the detailing.

-STEP 7.

For the last drawing step, all you have to do is draw out the long flowing beautiful tail. This is probably the nicest tail I have ever drawn on a horse before. Add detailing to the tail like hair strands, and clean up the drawing and you're done.

-STEP 8.

When you feel like the zombie unicorn looks good to your liking, you can start coloring in the beast. I hope you liked drawing my interpretation of a zombie unicorn.

 

16.baby phonix=

-STEP 1.

First, let's begin with the basic guidelines for our Phoenix hatchling. Like I said beforehand, take your time with the guidelines since the accuracy totally depends on it. You can trace the guides but do not trace the rest of the steps after Step 1.

-STEP 2.

Then, we shift our attention to the head of the baby phoenix. Notice how it's small and egg like to create a more younger appearance. Take your time when you get the beak area.

-STEP 3.

Next, time to finish the head with the feathers at the top of its head and the large eyes that make this baby phoenix EXTRA cute!

-STEP 4.

Before we sketch the body, we must first draw the egg so the body will fit into it properly. Make sure you create a line horizontally to create a boundary where you'll know to place the body from the distance of the head and egg

-STEP 5.

Lastly, finish off the body! Keep note that the wings should be diagonally across from each other. This will make them look in the proper perspective.

-STEP 6.

With further proofing and proportion check, you should have something similar to this. You can ink your drawing digitally like I did or use traditional Micron pens to create nice thick lines like the drawing above. I hope ya'll enjoyed this lesson, thanks for viewing!

 

----------------------------------------------------------------------------

17.phonix=

-STEP 1.

Star with two shapes, one for the head and another for the bottom. Connect them both with a neck line.

-STEP 2.

Draw the actual shape of the baby phoenix's head like so, then add the feathery tufts at the back of the head. Draw in the small beak, then draw the back of the neck.

-STEP 3.

As you know these birds of hope have three circles on the tips of their head feathers. Draw those in like so, then sketch out the chest, wing and then the clawed foot as well as some of the leg.

-STEP 4.

The next thing you will need to do his draw out the large eye. Make sure that the lining for the lid is thick, bold, and dark. Add lashes, then the pupil.

-STEP 5.

Almost done folks. Draw in more of the large wing, then draw in the long soft looking feathery tail. Finish the body by sketching out the other thigh and foot.

-STEP 6.

Lastly, add another piece of the tail feather. Erase the mistakes and you're done.

-STEP 7.

Now that you are all done, you can start coloring in your baby phoenix drawing that you just made.

----------------------------------------------------------------------------

17.baby mermaid=

-STEP 1.

Let's get started by drawing an egg shape for the head of your baby mermaid, then add a guideline through the center.

-STEP 2.

Draw out the lower portion of the mermaid's face like so, then draw in the arm and hand which is going to be touching her mouth.

-STEP 3.

Here you will start drawing out her lovely hairstyle which is simple, combed and neat. I drew in a pretty flower from the sea in her hair as well because as you know true mermaid often have something in their hair that brings attention.

-STEP 4.

Like most of my chibi figures, you will draw out a pair of large round eyes, then sketch in some dainty lashes. Once that is done draw finger lines on her hand, as well as her nose.

-STEP 5.

You are already almost done. All you need to do here is draw out the torso, right arm and hand, more of her hair, then draw the baby style mermaid tail.

-STEP 6.

Add the scale detailing to the tail and fins, as well as a band line around the waist like you see here. Erase the mistakes that you made then you are all set to color her in.

-STEP 7.

If you want to add something to her attire or change something about her appearance, go right ahead and do so.

----------------------------------------------------------------------------

18.kirin(2)=

-STEP 1.

I'm going to start off with a few tips, starting out with just a few tips on different types of horns. Horns can differ depending on climate and how many horns or spikes you want them to have. They can be more like the horns of an antelope or a deer. Or they can be more like the horns of a dragon. You can do ram horns or even moose like horns if you wish. Here are a few different examples.

-STEP 2.

They're hooves can also be a bit different depending on the sorts of terrain they live in. They can have narrow sharp hooves for rocky and mountainous terrains or they can have round flat hooves, great for keeping them from sinking into either snow or sand.

-STEP 3.

Their scales grow in patches both large and small and are scattered over their bodies and intermixed with fur and hair. They can have a few groups of scales or their body can be utterly covered in them. Scales also come in different sizes, varying from small to large.

-STEP 4.

Now we can move on to drawing a kirin. We're going to start with a base. We'll draw a circle for the head with a shape coming out of the front for the nose and then bring down a long line for the neck. We'll draw a triangular shape for the chest region and a half oval for the hips. We'll connect those two shapes with a line and then bring lines out for all four legs and the tail.

 

-STEP 5.

From there we will draw the shape of the head, snout and the front of the neck. We'll also draw in the shape of his ear and his mouth as well as part of his jaw.

-STEP 6.

Next we'll draw in the rest of his face and draw in the details of his ears and draw his horns. We'l also include the start of his mane.

-STEP 7.

Now we'll start drawing in the legs, starting with the front. We'll and them off looking shaggy and hairy.

-STEP 8.

Then after that, we add in the front hooves. I made mine sharp and narrow but feel free to be different. And we'll also start drawing the rest of the body, drawing a line along the belly and a line along the back.

-STEP 9.

And then we'll do the back legs the same as we did the front.

-STEP 10.

And the same goes for the hooves as well. We're going to start the tail here too, drawing a thick tube coming up from the back.

-STEP 11.

Now we can draw in the rest of his mane and the hair on his tail. We'll make it shaggy looking like the hair on his legs.

-STEP 12.

After that we're going to add some detail into the hair, giving it some definition. I gave mine a little braid on the side.

-STEP 13.

Time for scales. First we'll draw patched on the face and the neck.

-STEP 14.

And then the torso

-STEP 15.

And lastly the legs and tail. We'll also draw in some ridges on the horns (this is optional).

 

-STEP 16.

And there you have it. How to draw a Kirin.

19 .4 robot wolfty=

-STEP 1.

Alright guys you're in for a rare treat today! I have for you not One, not Two, not even Three, but FOUR Cyber Wolf Mechas for you to learn how to draw in this Tutorial! That's right I said FOUR CYBER WOLF MECHA, in FOUR DIFFERENT STYLES!! So let's get this thing rollin' shall we! First up is the Pack leader! 1. This is going to be the Pack Leader, so I want him to look strong, durable and have maximum mobility! I decided to design him to have a more Bio-Organic looking structure than most Mecha I draw! The result is a kind of rubber looking metal armor, but since it was looking a bit too much like rubber I thought of adding some LEDs all over his body to help give him a more futuristic/Tron-like look! When drawing Bio-metal type Mechas you'll want to have your designs looking very smooth, almost aero-dynamic in structure. So let's start with a nice simple skeleton. We'll need just a few simple shapes to plot out a pose. Now we'll start bulking him up with a few ovals and curves to give him a nice muscle structure! Remember, for Organic mecha you want to use round shapes and curves to define your mecha! Sharp edges should be limited to Weapons or really important features!

-STEP 2.

2. Now that we have a pretty decent looking structure for our wolf, we can start finalizing our sketch with more defined lines and details! I wanted the leader to look more advanced in technology than the rest of the pack, so I tried to keep his design as "Basic" as possible and opted for a simple, but effective Tron-like light pattern to go on his body!

-STEP 3.

Leader

-STEP 4.

3. Up next is the Pack Warrior! I wanted a nice ferocious, wild looking wolf, for this I thought I would go with the concept of "Werewolves" and give him lots of furry parts protruding from his head, mane and buttocks, then finish off with a nice bushy tail! So we'd start this one with a nice skeletal structure, (still keeping it simple) with a nice muscular upper-body build! Now notice how in the bulk-up process I've put a lot of round shapes and sharp edge shapes together! You might think that that would violate one of the rules I mentioned before about mixing Organic and Machine shapes together wouldn't you?

-STEP 5.

4. The thing that keeps this character in compliance with the rules is that I MADE SURE the two shapes were balanced by using curves on the shapes that come to a sharp edge the whole way around till the end! The curves on both shapes create the "harmony" between the two shapes that I often speak of! Now that a suitable base has been made, I can start adding in my details to give the shapes more dimension and finish my wolf!

 

-STEP 6.

Warrior

-STEP 7.

5. Next in line is the right hand of the Pack Leader, The Assassin/Bodyguard! I wanted to add a bit of diversity to the all male group, so I decided this one's design should be of female origin. I wanted her to be quick on her feet, lethal for sure, but at the same time have a shy, gentle somewhat elegant stature! For her skeletal structure I'm going with a nice pose that says calm, collective and obedient, so what better than the heel posture! In the bulk-up phase of the design I wanted to further emphasize her female features by giving her a nice slender build like that of a greyhound or fox and give her an image of radiance, yet remind the viewer of her assassin nature as well with deadly weapons, like a hydrangea flower!

-STEP 8.

6. Once I'd decided that she would wield buzzsaw blades, It was clear that the theme for my final draft of her should be razor sharp, so I began to plot out where I could add accents to her frame to further illustrate the idea. I decided her crown should be adorned with blades, but not so much as to draw too much attention away from the rest of her design. Her mane I figured would look great as knives, so I chose to give her a few with a curved fold-out knife for her tail!

 

-STEP 9.

Assassin/Bodyguard

-STEP 10.

7. Alright guys, this is the last member of the Pack, The Muscle! The last wolf of the group I felt should be built like a walking tank, or other heavy artillery vehicle and look really outdated in it's design when compared to the rest of the Pack! For this I decided to go with a Geometric (blocky) build for my Mecha! I started with a simple build for the skeleton (as always), emphasizing how heavily armored this Mecha will be by have it hunched over forward slightly in the direction of his heavier upper-body, to further illustrate the difference in weight of the two portions of its body! With a Mecha built this low to the ground you can pretty much guess that it's pretty low on mobility!

-STEP 11.

8. I also wanted to give him a nice weapon to complement his body posture! I didn't want a cannon, because that was TOO average for what I'd had in mind! I decided on chain guns instead and an assortment of nuts, gears and bolts for this guy, to give him the look of a tired old war machine. Now that I have a basic concept of what I want my Mecha to look like, I can start finalizing my sketch!

-STEP 12.

9. Now I can add in little details to give this old war-hardened wolf a little personality, like a permenant frown on its face, nuts, gears and bolts to give him a much older look than the others in the Pack!

-STEP 13.

The Muscle AND that's all there is to it! Another tutorial on How To Draw MECHA from yours truly! I hope this Tutorial was VERY helpful to you all! ~KenshinEien~

----------------------------------------------------------------------------

20.robot dragon=

-STEP 1.

1.Okay, so want to learn how to draw a dragon mecha! Well there are few things I'll need to point out first before we begin! First-off is Structure! Everything in the world is built up from basic shapes, Circles, Ovals, Ellipses, Rectangles, Triangles, Trapezoids and many more, but without lines to connect them you might not ever create really good objects. Using these basic shapes and lines together we are able to create amazing objects. Take this cola can for instance; It is made up of Circles, Ovals/Ellipses and a few straight Lines. By themselves, they aren't much to look at, but once they are put together they create a pretty impressive object! Simple right, but how do you get from a bunch of Lines and Shapes to something like a Dragon Mecha? Well follow along and I'll show you!

-STEP 2.

2.What you'll need is a plan and resources to get you started, so grab anything that you can find. Pics of Dragons and other animals, Machines (inside and out), Buildings, things in Nature, Lego building blocks(Especially ones from the Technic series) those are really helpful! These Items will come in handy later! Now think about what type of dragon you want to draw. A Land Mech, a Sea Mech, or maybe a Sky Mech! Once you have which type you want to draw, you can move on to the next step. For this Tutorial we'll go with a Sky Mech! We'll need to first start by creating a Skeleton for our dragon, just follow the steps, it's easy!

 

-STEP 3.

3.That's not bad! See how easy that was, now we have a skeleton we can build upon and we used a lot of the lines and basic shapes I spoke of earlier! Now since this is going to be a Whelp Mecha, I'll need to build it's body mass up like that of a baby dragon. Now we go to our resources to find a picture of a baby dragon, if we don't already know what one looks like! Look at it's features, is it chubby, slender, or a little muscular, maybe it's a combination of all three. Above all else the dragons body features must be a lot shorter than that of an adult. These are the things you must keep in mind to represent one correctly as a Mecha! Now start bulking up your skeleton (Keeping in mind the dragons muscle structure when building it up. Do you want it to look more machine-like or organic?). The more machine-like you want it to be- the more rigid your lines and shapes need to be. It' just the opposite for organic machines, where you'll need to concentrate more on making smoother shapes and curved lines! We'll go with an organic look for this dragon.

-STEP 4.

4.We'll create with round curvy-type shapes. You want to give an impression of metallic muscle when working on an organic Mecha, so try to pay close attention to that especially when working on the legs, chest and back! Draw circles or ovals on both sides where certain body parts will bend, like around the wrists, forearms, hind or lower parts of the legs and wing sections. When drawing spikes for your dragon, it's best (in my opinion) to round-out the sharp ends, unless they're to be used as weapons!

-STEP 5.

5.Keep going, We're almost there! Add Lines and shapes to further define your dragon. With this dragon I wanted to put emphasize on it's flight capabilities, so instead of just plane old wings that flap, I made them into thrusters whose feather-like protrusions fan out from the side, also added some boosters for extra thrust on the tail-end for extra impact. Simple additions like these can make your creations more impressive, so long as you don't over do it!

-STEP 6.

6.Sometimes, if not often, your not going to like your first attempt at this! Remember it's part of the learning process. You WILL get better at this the more you practice! I was not liking the way her mouth was looking and those spikes on her head weren't too flattering either. Those spikes were really bothering me, I wanted something that would convey the idea of machine more, so I started thinking. What do machines have on, or in them? Spikes (rarely), exhaust pipes (alright, but too generic), screws (yeah, it's different, but could work), then it hit me, Cogs! (Those scream machine!). So I swapped out the spikes for the cog design and added some minor details to the wings and viola, I'm finally satisfied, now all that's left is to finalize it with some nice crisp lines!

-STEP 7.

7.Now comes the best part... CUSTOMIZE THAT BABY!! Start adding in little details, exhaust holes for steam, or smoke to spew out from. Nose holes, ventilation grates, anything you can think of to help breathe life into your dragon. If you find it too hard to come up with on your own, take a look at your resources to draw inspiration, It's what they're there for! Draw extra lines on objects that look to flat to give those parts a sense of depth and dimension. Make sure you remember to round-off your sharp edges since this is suppose to be an organic-looking dragon. Too many sharp objects could conflict with the overall harmony of the smoother shapes! Notice how I rounded-off the edges of the cogs coming out of her head. Now they blend in more with the rest of the shapes in the image. The claws are fine, since they can be used as weapons, serve a purpose.

 

-STEP 8.

8.Round-out those shoulders don't forget to accent those moving parts. Think rubber insulation, or springs, things that bend. Robots usually have some type of insulation protecting delicate parts in that region. Also define those forearms, think screws, nut and bolts! Things that hold parts together, a few here and there usually fitted around heavy parts.

-STEP 9.

9.Almost done, that's looking pretty good so far! Keep adding details. You may want add things like small holes, or grates that allows a person to look inside at vital parts or circuitry. Objects furthest from view usually don't need to be too detailed unless they are meant to draw a persons attention to it, in which case it should be placed in the foreground of the image somewhere.

-STEP 10.

10.Congratulations, your hard work has finally paid-off! You made it through to the very end and now I hope you have a better understanding of how to approach the often-times very frustrating concept of drawing Dragon Mecha. Remember to use all of the resources at your disposal! The Internet is the best way to find research material for anything you need help with! Follow all of the steps in this tutorial and you'll be on your way to creating BIGGER more complex Mechas in no time! PRACTICE, PRACTICE, PRACTICE!! I hope this tutorial was helpful to you all! ~KenshinEien~

21.grphon=

-STEP 1.

Draw three circles. One for the head, the chest and the behind. The line down the head helps you figure out were to draw the eyes which we will draw later on.

-STEP 2.

Next draw simple shapes for paws, shoulders, legs, and a curvy line for the tail. Also leave circles on the head to help you place the ears.

-STEP 3.

Now use the circles to help you draw his pointy ears. Also draw a guide line for the neck and lines for the arms and hind legs.

-STEP 4.

Finally for the last guide lines draw circles on his paws for his toes. Also draw a funky pear shape on his head to help you place the beak. Last, draw guide lines for the wings. Please look closely at these guidelines.

-STEP 5.

Now its time to draw drawing! First start drawing his beak, it should be sharp and pointy. Then draw him some eyes and for his head and cheeks sketch out some fluffy fur.

-STEP 6.

Also add some more fluff to his chest area. We add fluff because gryphons have manes like lions. Then sketch out his ears. Gryphons can have other types of ears, but for mine I am going to use 'web' ears. You can also use 'owl' type ears or 'lion' type ears.

-STEP 7.

Remember he is fluffy so when drawing his arms add some fluffy. No need to try to hard on making fur and hair on creatures. The more time you spend on trying to make it perfect the less realistic it looks.

-STEP 8.

His back legs should be simple paws, and his hands should be razor sharp claws.

-STEP 9.

Time for the hard part, the wings. Drawing wings take a lot of time and practice. Here you can simply use the guidelines, but if you want different poses for the wings I suggest looking and studying real like bird photos. The feathers should be spread out and flowing free.

-STEP 10.

Finally draw him a long lion like tail. It should have a fluffy part at the end of it.

-STEP 11.

Now just add a nice black outline and coloring him in anyway you like

-STEP 12.

Gryphons can be any color. Mine is a traditional gryphon so he will be basic shades of browns and orange.

-STEP 13.

Just add some fun shading and your done! You can use pencils, markers, or your favorite art program! Good luck!

----------------------------------------------------------------------------

22.baby griffon=

-STEP 1.

Begin the first step by making a round shape or circle like so. This is for the griffin's head.

-STEP 2.

Using the shape you just made, begin sketching out the shape of the face, as well as the puffy hair on the forehead. Don't forget to draw out the ear and back of the neck or head too.

-STEP 3.

The next thing you want to do is draw a huge eyeball, then color in the actual eye. Add some pretty lashes, then make the mark on the beak for the snout. Draw the other ear, then add detail inside.

-STEP 4.

You are almost done. Draw the rest of the neck, then sketch out the feathery wings as well as the back leg. Also draw in some of the front leg.

-STEP 5.

You will finish your baby griffin by drawing the front legs, toes, and back toes. Draw in the tail then you can start the clean up process. Do this by erasing the mistakes (if any), as well as the guides.

-STEP 6.

Here it is, your new drawing of a baby griffin. Now color it in and show folks what you have done.

23.baby hyda=

-STEP 1.

Start the first step by making three shapes. Two for the heads and one for the body. You will need to draw a connecting line as well.

-STEP 2.

Sketch out the actual shape of the hydra's head and snout like so, then draw out the S style shaped neck. Once that is done you can move to step three.

-STEP 3.

Draw the second head the same exact way like you did the first. Once that is done you will draw the crest of the chest, and then draw the back end of the body as well as the tail. Don't forget to draw the thigh and foot.

-STEP 4.

Here is another step that will bring you one step closer to the finished result. All you have to do now is draw out the other head, then the chest, then the other foot. Sketch in the nice detailing lines on the heads and separating lines for the chests.

-STEP 5.

For the last step, make the eyes on each face, then draw the serrated lines which will form the mouths. You will finish the faces off by drawing the nostrils, then draw the scales on the chests. Lastly, make the spikes down the back as well as some spots on the body. Erase your mistakes if you made any, as well as the guidelines and shapes.

-STEP 6.

Here is what your baby hydra comes out looking like when you are all done. Now you can go ahead and color in this Mythology creature.

----------------------------------------------------------------------------

24.pegasus=

-STEP 1.

Start by making a circle for the head, and then add a connecting shape for the body like you see here. Lastly, draw in some facial guidelines.

-STEP 2.

Now you will start sketching out the shape of this easy Pegasus face, and head like so. When that is done start drawing out the body, and then draw the tail like so.

-STEP 3.

Here is where you will start sketching in the horses mane, and notice how I drew it hanging over the forehead for added cuteness. When that is done, you can go ahead and draw in the ears, eyes, and nostril holes. Lastly, draw out all the legs and include the hooves.

-STEP 4.

Yes, you have made it to the last drawing step. All you need to do is finish drawing the eyes and mane, and then add some detailing on the hooves, and then draw out the flying wings like so. Once that is done erase the lines and shapes you drew in step one to clean up the drawing, and to add last minute detailing to the tail.

-STEP 5.

Here it is guys, your finished drawing in an easy Pegasus. I hope you had fun as much as I did. Now you can color in your fantasy creature so you can proceed onto a new drawing challenge.

 

25.zombie horse=

-STEP 1.

Begin by making two circles, one for the head and the other for the body. Connect the two shapes with a neck line.

-STEP 2.

The next thing you want to do is draw out the structure of the horse's muzzle and lower jaw. As you can see the lining is very crooked and creepy looking. Draw the brow bone like so, and move to step three.

-STEP 3.

You will finish drawing out the head and face with this step. Start by sketching out the forehead, and then the rest of the head structure by sketching the cheek bone. Draw in the spiked mane in chunks instead of strands. Have some tips that are pieced out from each other. You will then use the brow bones as a guide to draw in the bowl shaped eyes. Darken under the eyes with a bold thick shading. Next, sketch in the creases and wrinkles between the eyes, on the muzzle or nose, and then draw in the exposed jaw with the teeth closed on each other. Draw the ears and add the stitch lines.

-STEP 4.

This is probably one of the easiest steps. All you have to do is draw in the chest or neck, and then draw out the front legs. Make sure that you cap the ends of the legs with flattened hooves. Don't forget to add some muscle definition around the shoulder.

-STEP 5.

Continue to sketch out the body by drawing the rest of the thick neck, and then draw in the back, butt or rear quarters, and then draw in the stomach and hind leg. Once that is done, you have to sketch in the rest of the spiky mane on the back of the neck, and then you need to make the tail too.

-STEP 6.

We can finish off the zombie horse now that all of the body, head and face is all sketched in. Sketch out the hair line at the bottom of each hoof, and then draw out the stitch lines that are used to close up some of the gashes. Draw the hole and guts coming out of the stomach and then clean up the drawing to prepare for color.

-STEP 7.

Here is your finished drawing when you are all done. Now you can start the coloring process to finish this drawing on a cool zombie horse.

 

26.zombie grifforn=

-STEP 1.

Start with a circle for the head and then make another shape for the back end of the body. Connect the two shapes with a body line before leaving this step.

-STEP 2.

Using the head shape that you just made, begin sketching out the actual structure of the zombie griffon's head and face. Start by drawing the top of the head, and then sketch in the large pointed but torn ears. You will then sketch in the cheeks which are feathery and low hanging.

-STEP 3.

Now that the basic shape of the griffon's head is sketched in, we can work on getting the face drawn. Start by making the shapes of the eyes and as you can see the top lid is thick, bold, and darkened. Make both eyes this way, and then sketch out the detailing for the ears, forehead and face. Draw the first gash and stitch it up.

-STEP 4.

This is a pretty easy step because all you need to do is draw in the eagle style beak which happens to be open with the tongue sticking out. Next, and lastly for this step, draw in another gash on the cheek this time and stitch that wound up as well.

-STEP 5.

Now we can start working on getting the body drawn out. The first thing that we will tackle is the upper body. Having said that, sketch out the neck, and then with the same lining draw in the chest. The coat of the griffin is real rank and tattered. The chest should be drawn in a manner that there is actual hair chunks layered down the form of the chest. Once this is done you are ready to draw in the arms or front legs, and then draw out the detailing which is the long coat.

-STEP 6.

Before you start sketching in the good stuff, you will need to finish off the upper body. Do this by drawing out the talons or front claws, and then you can begin sketching in the detailing like the surface flaws of torn flesh, and puncture wounds on the shoulder. There is also another stitched up gash that you have to draw in on the chest too so don't forget that.

-STEP 7.

Here is where you will start drawing out the intestines which are pouring out of the gut of this zombie griffin. After you have completed this step, you can move to step eight where you will be closer to the end of this lesson.

-STEP 8.

Now you will draw out the large tattered wings of the griffin. Even though the wings are not filled with flaws, they are still not fluffy or new looking. Instead the ends of the wings feathers are spaced and in chunks like you see here.

-STEP 9.

Now you will finish off this zombie griffin by drawing the rest of the body. Start with the right side and sketch out the rear end, and then draw in the leg and slightly oversized foot and clawed toes. Draw out the other leg and foot, and then finish this step by sketch in the long tail with a tuft at the end. Sketch in some surface detailing and then erase the lines, shapes, and mistakes you drew earlier.

-STEP 10.

This is the last step and as you can see it is what your line art should look like. Color in the zombie griffin to your liking, and you are all done.

27.zombie jake(advanture time)=

-STEP 1.

First, begin with by lightly sketching the guidelines for the body of Jake. Take your time with this step, because whatever is drawn after this, will totally depend on how well structured your guides are.

-STEP 2.

Next, sketch the guides for the base of the head. Bake sure you draw this guide lightly as well, and erase the 'grey' overlapping lines after.

-STEP 3.

Now, let's work the magic of drawing the actual zombified face of Jake! This part was fun, but it was tedious because I had to sketch various positions and angles of the ears/muzzle to add movement to his action. To start, just draw a simple nose right beneath the center of the guides.

-STEP 4.

Next, let's work on the mouth for Jake by sketching the upper gums of the teeth and then the sharp edges. Take your time, and try to vary the widths/lengths of them to add a sort of dynamic/mutated appearance.

-STEP 5.

Then, sketch the long flappy muzzle that droops across the mouth. Because they're drawn at this angle, it will add dynamic movement to the character, as if it were in action.

-STEP 6.

Sketch the tongue that droops outwards, and the lower jaw. Wouldn't want to be bitten by those teeth now would we...

-STEP 7.

Let's begin the process of drawing the rest of the head by sketching the eyes FIRST. Then we can move onto sketch the floppy ears. The reason we want to draw the eyes first is to make sure the rest of the face is drawn in proportion.

-STEP 8.

I know...take a deep breath, ok? This looks like a breathful of panic because of so much to draw! That's why I have this listed as 'Advanced'. Anyways, work on one leg at a time, and try not to rush due to frustration.

-STEP 9.

Now, the sticky gooey fun part! Let's sharpen are pencils a bit more and slide over to sketching the torn fleshy parts. This part may be so much fun for most of you gory flesh lovers, so take one step at a time! Use thick outlines for the most detailed/gory parts and thin lines for the smaller details (muscle tissue, intestinal details).

-STEP 10.

Lastly (though this step isn't necessary), we'll draw the remains of Finn beneath his paws, as if he just devoured him whole. This step is totally optional to add contrast and appeal to your drawing.

-STEP 11.

Be sure to check your sketchy lines for any mistakes before you finalize your line art. I prefer to use ballpoint ink pens or varied tipped Microns. I hope you guys enjoyed this lesson, I will be back with more awesome tuts! Peace out and let me know how you did, or if this tut was challenging enough (I've had a few people tell me they want harder tuts!)

 

28.dragon=

- STEP 1.

Lets begin with this long, but helpful tutorial on drawing a dragon for kids. We will start with the dragon that is in the thumbnail. Start by making a round shape for the head, and then add a long neck line. Once that is done attach the neck to the body shape which sort of looks like an egg. Add one tail line, and then move along to step two.

- STEP 2.

Now that you have the guides all drawn out, start drawing the head structure. This is basically thickening the lines you already drew, but then add the shape of the nose.

- STEP 3.

Next, draw the horns, and then make the shapes for the eyes.

- STEP 4.

All you have to do here is draw in the eyeballs, and then color in two nostrils, and a crease on the bridge of the nose.

- STEP 5.

Now you will be drawing out the body starting with the thick neck. Move along to draw out the body, and then draw the back end of the dragon until it comes out looking like a pillow.

- STEP 6.

Here you will draw out the front legs and then the cute posed front feet. Be sure that the tips of each finger is pointed.

- STEP 7.                     

Draw in the belly and then draw the hind leg, foot, talons, and then the short stubby dragon tail.

- STEP 8.

Now that your dragon is all drawn in, you can now just simply clean up the guidelines and shapes that you drew in step one, and then draw out the wings.

 

- STEP 9.

This is what your dragon looks like when you are all done. Now you can have fun picking a shade to color it in. Proceed onto the helpful steps that will also show you how to draw a dragon with frills, and how to draw a dragon head.

- STEP 10.

Start with a shape for the head, and then draw a neck. Next, draw out the body shape which kind of looks like a rock.

- STEP 11.

Begin shaping out the face which is just the jaw line, and nose. When that is done move to the next step.

- STEP 12.

Now you will draw out the frills and if you look closely they look a lot like fish fins. Draw the frills on the sides of the head, and then on top of the head. Finish drawing out the head before moving to the next step.

- STEP 13.

Draw in the shapes of the eyes, and then draw the slitted pupils. Add dashes for the nostril holes, and then begin drawing out the body and tail the way you see it done for you here.

- STEP 14.

Now draw in the front and back legs, as well as the chest, and stomach. Be sure you take your time so you end up with this awesome looking dragon.

- STEP 15.

Now all you have to do is draw out the toes for the feet and then draw the detailing swirls on the elbows and knees.

- STEP 16.

Erase the guides and shapes you drew in the first step, and then draw out the one wing.

- STEP 17.

Now for the dragon heads. Make two shapes that are sort of odd in lining. Add the facial guidelines to the head on the right.

- STEP 18.

Now begin sketching out the structure of each head the way you see it done here, and notice how the two are very different in appearance.

- STEP 19.

Continue to draw out the heads. The one on the left needs to have the nose and mouth drawn in, and the head to the right has the jaw line and eyes all drawn in too.

- STEP 20.

Color in some eyeballs, and then draw out the tongue for the dragon head to the left. When that is done continue to draw out the head of the dragon to the right as well as the head frills.

- STEP 21.

Draw out the shapes of the necks, add some detailing and you are all done. Erase the guides and lines from the first step to clean up the drawing.

- STEP 22.

You have finished this full tutorial on how to draw a dragon for kids which includes the body and head. Hope you enjoyed this lesson and I also hope you learned something new.

----------------------------------------------------------------------------

29.simpel dragon=

- STEP 1.

This dragon is simple enough to not use guidelines. If you don't need guidelines, skip to step 5. First start with a circle to show where the head will be. Add a line to show where the dragon is looking.

- STEP 2.

Add a line of motion. This shows how the dragon's body is positioned!

- STEP 3.

Draw two circles for the body! The chest circle should be bigger than the hip circle.

- STEP 4.

Add lines to show where the legs and wings should be.

 

- STEP 5.

Start drawing the head. It is almost like a squished oval shape.

 

- STEP 6.

Add the cheek, which is a half circle. The eyes are closed, so just draw a curved line. A circle can show that this dragon has a nose.

- STEP 7.

I drew rounded triangles for the horns. Since I am drawing a cute dragon, they aren't very big. You can draw them however you want, though.

- STEP 8.

Start drawing the neck.

- STEP 9.

Draw the back and the front of the chest. The front of the chest is almost a half circle.

- STEP 10.

Draw the dragon's arm. It doesn't have to be very detailed. This shape is similar to a squished rectangle.

- STEP 11.

Draw the other arm.

- STEP 12.

Draw a curved line for the dragon's belly.

- STEP 13.

Start drawing the back leg.

- STEP 14.

Finish the back leg. Remember that it is thicker when it is closer to the body.

- STEP 15.

Draw the other back leg. Part of it is hidden behind the other leg.

- STEP 16.

Draw the tail. It is only a triangle. I drew a small tail to make the dragon look more cute, but you can draw it as long as you want.

- STEP 17.

Draw a line for the first part of the dragon's wing.

- STEP 18.

Connect a line to the first line of the dragon's wing for the "finger" of it.

 

- STEP 19.

Finish drawing this finger of the wing.

- STEP 20.

Draw the rest of the fingers. They are just long triangles. They don't have to be too long if you want the dragon to have cute, little wings.

- STEP 21.

Draw another line to connect the rest of the wing to the body.

- STEP 22.

Draw the webbing between each finger, then connect it to the body.

- STEP 23.

The wing on the other side doesn't show much, so you can just add the side and top of it.

- STEP 24.

Add any details you would like the dragon to have and you're finished! I added chest plating and skin where the horn starts. Colour your dragon however you'd like if you want! Enjoy your new little dragon!

30.helioptile(pokemon)=

- STEP 1.

You will start out by making an odd circle for the head, then draw in the guidelines for the face and neck. Next, draw the small shaped body, then proceed to step two.

- STEP 2.

Define and smooth out the head shape for Helioptile. Then draw the neck shaft. You will tackle the body in later steps.

- STEP 3.

Next, draw the visor like shape that runs across the face like a mask, then draw in the oval shapes for each eye. Add a triangle between the eyes, then add the mouth and nose or nostrils.

- STEP 4.

In this step draw the stomach, then draw the front and hind legs. You will also need to draw out the long, but stubby tail. Draw in the flat like feet and hands, then proceed to step five.

- STEP 5.

For the last drawing step all you have to do is draw the long floppy ears, then draw in the caps on each ear. Erase the mistakes then you're done.

- STEP 6.

Here is the line art when you are done. All you have to do now is color in this new Pokemon species.

----------------------------------------------------------------------------

31.fletchling(pokemon)=

-STEP 1.

Make a kidney bean shape for Fletchling's body.

-STEP 2.

Here you will define the shape of the bird's body then draw in the small wing as well as the small beak.

-STEP 3.

Next, sketch out the tail which is perky, then add a marking on the wing.

-STEP 4.

Draw out the one eye for now, then draw in the eyeball, markings around the eye and face, then draw in the markings on the chest and tail.

-STEP 5.

We will finish Fletchling off by drawing the cute birdie legs and feet. Erase any and all the mistakes that you made.

-STEP 6.

The line art comes out looking awesome and ready for you to color in. I do hope you enjoyed this Pokemon installment.

----------------------------------------------------------------------------

32.charmander cubcake=

-STEP 1.

Well let's start by drawing a bowl shape like you see here.

 

-STEP 2.

The next thing you will do is draw or fill in the cupcake base by drawing the frosting swirl.

 

-STEP 3.

Lastly, draw or color in the eyes, add the nose and draw out the simple lining for the mouth. Erase any mistakes that where made.

-STEP 4.

The line art will look like this when you are all done.

----------------------------------------------------------------------------

33.ash and Pikachu(pokemon)

-STEP 1.

Start off by working on Ash. Draw a large circle for the head, then add a facial guideline. You will then draw out the body, then move to step two.

-STEP 2.

Thicken the lining that you made in step one for Ash's face, then draw out the lid of his had. Make sure it's over sized to match the chibi style.

-STEP 3.

Here we will work on drawing in Ash's face. Do this by drawing the big wide open doe eyes, draw the bang, and then draw in the nose bump, mouth and blush marks on the cheeks.

-STEP 4.

Next, draw the rest of Ash's cap or hat like so, then draw out the detailing and design on the hat too.

-STEP 5.

All you have to do here is draw out Ash's ears, then draw in the hair that is shown from the sides of his head near the lower parts of his jawline.

-STEP 6.

Next, draw the neck as well as his collar for the jacket. Draw out small chibi arms as well as his torso. Remember, Pikachu will be clinging to Ash's shoulders.

-STEP 7.

Okay guys, draw the legs to finish Ash off, then sketch out the detailing to his clothes. You will also need to draw out his belt then the fingers.

-STEP 8.

For the last step all you have to do is draw out his foot, then draw Pikachu behind Ash. He looks like a small baby version of himself which makes Pikachhu super cute. Erase the mistakes that you made, then proceed to step nine to see what your drawing looks like when you're done.

 

-STEP 9.

Here is the finished drawing of Pikachu and Ash. Now you can have a super time coloring him in to perfection. I hope you liked this lesson on drawing Ash and Pikachu.

----------------------------------------------------------------------------

34.pikachu dragon=

-STEP 1.

Begin by making a circle for the head, then draw out the body shape. Make the tail line with an electric bolt pattern at the end.

-STEP 2.

Begin drawing out the structure of the face or snout which is also the mouth too. The mouth lining should have some points. Draw the two horns like so, and give this Pikachu dragon some fluff on his head for added cuteness.

-STEP 3.

Now we will draw in the face. Start with the eyes, then draw the round marks on the cheeks. Line the tips of the horns, then draw in the tongue, and nostrils.

-STEP 4.

Draw the back of the neck shape, then the front which turns into the chest. Draw the start of the front legs, and sketch in some detailing on the belly and chest.

-STEP 5.

Draw the lining to form the back, then draw in the hind leg. Draw the toes, and finish off the dragon by drawing the thick electrifying tail.

-STEP 6.

For your last drawing step all you have to do is draw in the bat style wings, then draw the talons which should have a sharp look. Add the detailing to the wings, then sketch in some tuft of hair on the back part of the neck. Erase the mistakes and guidelines.

-STEP 7.

Here is what your drawing of a Pikachu dragon looks like when you are finished. Now all you have to do is color him in.

35.pixie dragon=

-STEP 1.

Let's begin by drawing three shapes, one for the head, one for the torso, and another for the back end of the dragon's body. Connect the head shape to the torso with a neck guide.

-STEP 2.

The next thing you will do is sketch out the shape or structure of the dragon's head. Start at the forehead and then draw the snout as well as the mouth line, chin, and jawline.

-STEP 3.

We are going to keep the momentum going by working on the head and face. Sketch out the back part of the dragons frill shape behind the jaw, then draw the long horns and bony structure design behind the head. Draw the eyes, nostrils, then some definition marks on the snout.

-STEP 4.

Now that the head and face is complete, we can tackle the task of drawing out the dragon's body. Start with making the long neck like so, then draw the pocked out chest. Draw the arm and hand, then make some frills on the elbow of this pixie dragon. You will end this step by sketching out the thigh as well as adding some skin texture definition.

-STEP 5.

Draw the back and tail lining for your pixie dragon, then draw in the stomach, as well as the other leg. When the legs are all drawn, sketch in the muscle detailing, then draw the long feet and toes. Notice the tissue behind each foot, this is supposed to bring out the fairy image in this dragon.

-STEP 6.

Now that your dragon's body is almost all drawn in, you can get the tail sketched out. This should start off thick, but then thin out as you can see here. The end of the tail should curl in a boxy manner. Draw the other talon then sketch in the tail detailing up near the butt area.

-STEP 7.

Now it's time to draw some beautiful fairy wings on your pixie dragon. This is where you can be as creative as you like. You can make the same style wings as you see here, or go with your own style. You will need to draw some soft looking skin tissue down the tail as well as some stringy frills. Erase your mistakes then you are ready to color in your new dragon drawing.

-STEP 8.

Here is the pixie dragon when you are done. Now you can choose a color pallet and begin the coloring process.

-STEP 9.

And with colors, this is what the fairy dragon should look like!

36.dragon egg=

-STEP 1.

Make a circle for the head and then another larger one for the body like you see here. Make a connecting line from the head to body and then move to step two.

-STEP 2.

Draw the top part of the egg shell and as you can see it has crack lines on the broken off piece of shell.

-STEP 3.

Using the shape you drew in step one for the head guide, draw out the face structure first, and then draw in the snout, mouth line, and then draw the eyes and small horn on the top of the nose like you see here.

-STEP 4.

Okay, lets get the egg out of the way and to do this all you have to do is draw have of an egg shell. The broken part of the egg should be drawn with straight edges and points. Add some cracks on the shell like so, and proceed to step five.

-STEP 5.

Lastly for this step, all you have to do is draw out the long neck, and then the wings which are still closed and hugging the body. Draw the stripe on the chest, and then add the horizontal lines too. Make the spikes on the back of the head and neck like so, and then begin cleaning up your drawing.

-STEP 6.

The line art looks awesome like you see here and it is all ready to be colored in. Use your own coloring ideas to what type of dragon you want to make into a hatchling. I went with a fire or red dragon from the depths of the volcanoes. Thanks guys and good work!

----------------------------------------------------------------------------

37.dragon inside the egg=

-STEP 1.

Even though you will be drawing a dragon inside of an egg, you will have to draw the baby dragon first. Start with a head shape like so, and then make a line for the neck position which is bent in an arch. Attach the end of the line to the body shape.

-STEP 2.

You will now start sketching out the actual structure of the dragon's head. As you can see it is in a fetal pose with the head bending downward. Draw the jaw line and then draw the spikes on back of the head.

-STEP 3.

Continue to draw the neck, and then draw in some of the back part of the body. When this is done make the arms and small talons.

-STEP 4.

You will now be drawing the baby dragon's wing which is normally wrapped around the lower part of the body like a blanket. Once you have done that, you can sketch out more of the abdomen as well as the back part of the body.

-STEP 5.

You are getting closer to the end of this tutorial. All you have to do now is sketch out the legs and feet, as well as the cute toes.

-STEP 6.

Finish the dragon embryo by drawing the tail. As you can see the tail is curled upward which forms a ball or the shape of the egg. Add some detailing to the wing and then clean up the baby dragon.

-STEP 7.

Lastly, draw the shell that houses the embryo like so using thick bold lining.

-STEP 8.

Here is your finished drawing of a dragon egg when you are all done.

 

38.baby dragon=

-STEP 1.

First, let's start with the guidelines for this baby dragon. Like I said in the tutorial description, try drawing these guides accurately as possible so you'll have a successful outcome. Draw these guides lightly on your paper!

-STEP 2.

Then, we'll move onto the head first, since it's best to work from head to toe rather than body then head. Once you've got your head drawn, the lower you work further, the easier it will be to proportion the body correctly.

-STEP 3.

Next, we will sketch the facials first before we shift our attention to the frills that hang at the left and right sides of our dragon's face. Try drawing the facials aligned correctly by making sure the pupils lineup diagonally with one another.

-STEP 4.

Now that the head is done, let's start sketching the neck and back area for this baby creature. Sketch the neck out first then move onto the leg instead of randomly drawing a region of the body.

-STEP 5.

Let's finish the torso by sketching the two front forelegs that support this dragon's pose upwards. Take your time with the individual toes, keeping in mind the same amount of toes/fingers must repeat throughout the four limbs.

-STEP 6.

To finish the backlegs and tail, let's sketch the toes out and then the tail. The tail in this case is swirling in a curved - crunched position.

-STEP 7.

Lastly, sketch in the underbelly scales and then the wing. Draw the arm first before you draw the membranes or wing fingers in between. It's best to evaluate where you will pose and place the wing.

-STEP 8.

With essential cleanup and proofing, you should have something similar to this. Ink out your drawing and vary your line widths of each stroke. You don't want to have the same pixel thick lines throughout the drawing, it would be hard to focus and uninteresting. I hope ya'll enjoyed this tut, thanks so much for viewing and have fun with your new drawing!

39.black dragon=

- STEP 1.

Like with the rest of the dragons you drew in the past, you will need to draw a few shapes and guidelines. Start with a head shape like so, make the neck guide and attach it to the torso shape and then draw the oblong body shape. Lastly, draw the wing guideline.

- STEP 2.

You will now draw the outline or structure of the dragon's head. As you can see it has one visible horn, and the snout and mandibles have points and edges.

- STEP 3.

The next thing you will do is draw the thick shape of the dragon's neck like so, and then move to step four.

- STEP 4.

Okay, you will now start drawing out the dragon's mane which like horses starts at the top of the head. Continue to draw out the mane or hair going down the neck in a flowing pattern, and then add some detailing by drawing strand lines. Sketch in the spiral pattern in the horn, and then draw in the eye, nostrils, teeth and reptilian tongue.

- STEP 5.

You are ready to move onto getting the body drawn out, and as you can see the front legs and talons are very bold, and thick. Draw the chest first, and then draw the wide or strong looking trunk like legs, and then draw the toes. Sketch out the shoulder and then draw the first part of the black dragon's wing.

-STEP 6.

This is actually the last drawing step. All you have to do is draw the back, thick tail, and then draw the stomach hind legs and feet. Notice how the toes are thick, long, and strong. Sketch in some detailing around the toes and ankle and then finish drawing out the dragon's wing. Erase the mistakes to prepare your dragon for awesome color.

-STEP 7.

All you need to here is draw out the neck, belly, and tail scaling like you see here. Instead of normal horizontal lines, I went with a more detailed patterned and draw V shaped lines down the chest. Sketch in the nails or claws like so, and then sketch in some of the muscle detailing and definition on the body. You will finish off this dragon by adding some hair on the tail, and then draw in the other skin based wing. Don't forget to add some muscle definition to the wing arm like so.

-STEP 8.

Your black dragon is all done and ready to color in. I really do hope that you had a blast with this tutorial, because I had a lot of fun drawing it out for you all.

 

40.sun dragon=

-STEP 1.

Begin with drawing out the lines and shapes to form a workable frame for your sun dragon. As you can see the body is in a curved like pose, but you can do whatever you like.

-STEP 2.

Starting with the head guide, begin sketching out the profile of the dragon's face and head like you see here. The snout should be long and the mouth is obviously open. Draw in the attached horn the comes off the forehead, then draw in the eye, and frill on the back part of the jaw.

-STEP 3.

Here we will continue with drawing the frills in the form of flames. All you have to do is start with a circle pattern but instead of smooth lines, you will make fiery edges. Add detailing to the cheek frill, then draw in the tongue and teeth.

-STEP 4.

You will now draw out the body. Like I said in step one, the body pose is on a slither, so when you draw the neck, make sure to draw the neck and torso in the pattern of an S. Sketch out the front arms, then draw the hind legs, or thighs like you see here.

-STEP 5.

Continue on with drawing the body until the tail is completely drawn out. I didn't want to include a tuft at the tip of the tail because I thought that the wings was enough flames. When the tail is finished, draw the rest of the legs which includes the feet. Sketch in the body definition like so, then you can start erasing the guidelines within the dragon's body.

-STEP 6.

You will work on getting the wings drawn out. Start by drawing the arm of the wing like so, then from there make the wispy looking flaming wing. The ends or edges should be drawn in a rugged or ruff manner.

-STEP 7.

Repeat exactly what you did in step six, to step seven. You will try to draw the left wing the same way you did the right. When you are satisfied with the results you can begin erasing the mistakes you made.

-STEP 8.

In the end your drawing of a sun dragon should come out looking like the one you see here. Now all you have to do is color in your artwork.

----------------------------------------------------------------------------

41.moon dragon=

-STEP 1.

To start, we will need to draw a shape that is circular for the dragon's body pose of motion. Begin with one single stroke that is capped with a head shape and sectioned off with an oblong shape for the moon dragon's body.

-STEP 2.

For step two, you will begin sketching out the dragon's head from a profile state. Start with jaw, and then continue on from there by incorporating the snout, face, and horns.

-STEP 3.

Now you will sketch in the detailing to the face like the rippled scale lines that flow down the horns and face. When that is done draw in the eye, nostrils, then carefully sketch in the frills behind the jawline and for the beard.

-STEP 4.

Now that the head is complete, you can proceed on with drawing the first part of the body which starts with the long neck, then turns into the chest and mid section. Draw the front legs like so, and be sure to sketch in the detailing for the legs as well.

                                                                                                   

-STEP 5.

Instead of drawing the body I thought it would be cool to draw out the wings in a way that covers the body completely in a cloak like fashion. The edges of the wings should be drawn with wispy cloud like design, or you can choose to go with a style that you think would look better. Add detailing throughout, then proceed to step six

-STEP 6.

Only one more drawing step after this one guys so hang in there. What you will need to do now is draw out the rest of the body which is the bottom section and the tail. Draw the back leg in a relaxed manner, then sketch out the talons. Add detailing to the foot like so, then you are done here.

-STEP 7.

Lastly, draw out the other wing that will only be visible because it is wrapping on the body like you see here. Make the edges the same way you did previously, then sketch in the final definitions and detailing all over the body where needed. Erase the mistakes that you might have made along the way.

-STEP 8.

When you are done your moon dragon should come out looking like the one you see here. Now all you have to do is color it in and add the moon in the background so that it cups it perfectly.

-STEP 9.

Here is what the entire image looks like all colored in and with a background. I hope you liked this lesson, because I know I loved drawing this dragon.

----------------------------------------------------------------------------

42.DEATH DRAGON=

-STEP 1.

This is a sketch I made that shows the differences between the same dragon. As you can see the dragon to the left is the death dragon dragon, and the one to the right is what the dragon would look like if it wasn't full of death.

-STEP 2.

Start by drawing two shapes, one for the head and the other for the body. Draw the connecting neck line.

-STEP 3.

Next up, you will start sketching out the head structure of the dragon which is the forehead, snout, and jawline. The mouth line should be drawn in a jagged manner.

-STEP 4.

Next, draw in the horns, as well as the eye and some of the detailed lining on the lower part of the jaw.

-       STEP 5.

Draw the entire neck shape as well some of the body which is in the form of the spine bones. Sketch in the missing tissue line and then draw some of the shoulder.

- STEP 6.

Next up, draw the arms as well as the talons. Sketch in the detailing to the skin's texture or surface like so, and then add lining for the belly and chest.

- STEP 7.

Okay guys here you will draw the dragons legs. One in the front and the other in the back. Next, add the feet or claws and then detail the legs before you leave this step.

- STEP 8.

Sketch in the exposed bone detailing which is flowing up and down the neck. You're actually drawing the cartilage as well as some membrane tissue as far as detailing. Add the lining for the rib-cage, and then draw some toes on the hind leg or foot. Sketch some definition on the legs and move to step nine.

- STEP 9.

Your death dragon is coming along nicely. You will draw the back end, and then draw the hind leg. Make some nicely arched claws on the back foot like so before you leave this step.

- STEP 10.

Before you draw the bony tail for your death dragon, you will need to add some more detailing to the hind leg and around the ankle. When you have completed this task, you can begin drawing the exposed bony tail drawing each layer of bone at a time.

- STEP 11.

You will now start drawing the wing, and as you can see it is lacking any real wing based tissue. Add detailing to the arm part of the wing, and then draw in the exposed skeleton like teeth.

-STEP 12.

You will now draw the three finger like bones for the dragon's wing and add the joint lines where applicable

-STEP 13.

Lastly, you will start sketching out the decaying skin tissue on the wing, and then add all the last minute definition on the wings. Erase all the mistakes as well as the guidelines that you added along the way.

-STEP 14.

Here is the end product of your death dragon. Now you can have fun coloring it in. Great work everyone.

----------------------------------------------------------------------------

43.ELECTRIC DRAGON=

-STEP 1.

Let us begin by making some of the basic guides, shapes and lines to create a workable frame for our new dragon drawing. You will need to make the shape for the head, then draw the curved neck guide and attach it to the torso shape. Next, draw out another shape for the thigh. Add the long tail line as well as the guides for the feet or talons.

-STEP 2.

We will now begin sketching out the face and or sturcture of the dragons snout, head, and horns. The brow for the eyes also need to be drawn in. Make sure the muzzle is drawn with lots of sharp points.

-STEP 3.

Next, draw the thickness of the neck, then draw in the dragon's shoulder as well as the first arm. Draw the clawed talon like so, and add some detailing to the part of the body you just sketched out. Also, draw in some of the stomach and chest.

-STEP 4.

Draw out the back lining to form the back end of the dragon's body like so, then start sketching out the hind leg and foot which should be bigger than the front claws, hands, or talons. Draw in the other arm, then add a little more detailing to the reptilian body.

-STEP 5.

Draw out the other leg which includes the thigh, foreleg, and foot. Next, finish off the body by drawing out the long bolt shaped tail like you see here. You should also sketch out the detailing for the crotch area too.

-STEP 6.

We will now focus on getting the wings drawn out. Notice that the wings have a rawness to them. The are large, and the tips are spaced pretty good for maximum flight and speed. Draw in the clawed tips, then add some detailing so they come out looking sort of like bat wings.

-STEP 7.

All you have to do now is sketch in all the detailing that makes the dragon stand out like the sharp frills on the head, neck, back and tail, then sketch in the face as well as the tongue, and horn definition. You will also need to define the wings. I suggest that you do all this after you erase the mistakes you made throughout the lesson.

-STEP 8.

Here is what the finished drawing looks like as line art. Now you can have even more fun coloring it in. Look below for the full colored image of this electric dragon.

-STEP 9.

Here it is, the whole image colored in. I love the colors because they capture the very essence of all the energy that this dragon has.

44.skeleton dragon=

-STEP 1.

Now, here's something cool I wanted to express in this tutorial, mainly because dragons vary in a crapload of sizes. The common dragon height (in my opinion) is 30ft tall (including wing height as well). They are typically larger than a Tyrannosaurus Rex, initially the bigger and better predator. With the ability of flying, breathing fire and large jaws, this beast can max out any predator on two legs. If on the other hand a dragon is dueling its own kind, competition will vary on the age/skill of a dragon's capability of battling. On another topic, notice how the size of an average 5ft person is out-sized by these two ferocious beasts. Imagine being face to face with a huge 30ft tall beast?! In conclusion, practice with various sizes for your dragons, and don't go too tall unless it's a rare (nearly extinct) colossal fire breather. But again, experiment!

-STEP 2.

gaHere's another step I'd like to stress a bit more since lots of artists tend to go way too extravagant with their interpretations of dragons. Enlarge the image and read the individual tips and key points about this skeletal structure. Knowing the boundaries of this creature is very important since it will aid you to your success of creating a unique and logically correct dragon.

-STEP 3.

Well, you will start by drawing some basic guides and shapes to form a frame for your dragon skeleton. Start with a small head shape, and then draw the neck guide. Attach the neck to an oval torso, and make another circle for the back end. Draw the wing and limb guides before leaving this step.

-STEP 4.

Here you will begin drawing out the skull for the dragons head. There is only two horns, so make sure you add those as well. Sketch in the serrated edging for the top and bottom jaw, and make sure that the mandibles or lower jaw is pointed and jagged.

-STEP 5.

The next thing to do is draw in all the hollow holes on the skull. This is going to be for the eye, nose, and temple. Draw in the skeletal teeth, and then move to step six.

-STEP 6.

Take your time with this step because you will be drawing the neck bones or neck vertebra. Next, draw the shoulder and chest bone and then move to the next step.

-STEP 7.

You will now draw in the first of the front leg bones starting with the coracoid. Next, draw in the ribs, and some of the back spine bones. Take your time so the bones come out nice.

-STEP 8.

Next, continue to draw in the front leg by drawing the joint gap and then the ulna which is the forearm looking bone. Draw the bones for the talons which is a combination of the carpus and metacarpus bones.

-STEP 9.

Start this step by drawing the pelvis or ilium bone, and then continue to draw the thigh or femur bone, followed by the tibia and ankle bones as well as the foot and toe bones.

-STEP 10.

You will now draw the wing bones or the wing humerus which is the lower portion of the wing bone, and then draw the wing radius bone which is the upper part of the wing.

-STEP 11.

You will now draw out the wing phalanges which is the finger bones for the wing. Make sure to draw the thumb bone and then draw the tips or nails at the ends of each wing bone.

-STEP 12.

Lastly, draw the tail bones and vertebra like so, and make sure to take your time because these bones are very fine, and get smaller as you go down the tail to the tip. Clean up the drawing and you are all done.

-STEP 13.

Here is the final step now that you are all done. I hope you learned something new and I also hope you liked this tutorial on drawing a dragon skeleton.

 

45.baby deathwing dragon=

-STEP 1.

Lil Deathwing is an exact replica of the real deal Deathwing. So let's get started. Begin by making two circle shapes, one for the head and the other for the body. Draw a wing guideline and move to step two.

-STEP 2.

Begin the second step by drawing the very strong looking metal armored jaw structure. You will then draw the teeth, as well as the bold at the side of the mouth or jaw. Notice the under-bite this dragon has.

-STEP 3.

For the next step you will be drawing the head, and horns. The eye is actually part of the horn like you see here. Make another smaller spiked horn in the center of the head and then draw plated armor on the back part of the dragon's head.

-STEP 4.

You are now ready to start drawing the body. Begin with a neck line, and then sketch out the armor plated chest all the way down to the stomach. Next, draw the arms and thick talons or hands like so. Add detail and definition before you leave.

-STEP 5.

Finish drawing a majority of the body which is the back of the neck, the back, tail, leg and foot. Notice the spear tip at the end of the tail. When this part is done you can get started with the wing. Begin by drawing the bone or arm and finger parts of the wing.

-STEP 6.

Now you can draw the skin based tissue to complete the wing. Notice the edges of the wings are tattered. Add detailing, and then draw the other leg and foot. You will also need to sketch in scale definition on the leg and foot like you see here.

-STEP 7.

Before finishing up, erase your mistakes and guides, then get busy adding the last bits and pieces which is all the definition and detail that will bring texture to the dragon's body.

-STEP 8.

Here is Lil Deathwing when you are all done. I hope you had fun with it, join me again for more drawing fun.

----------------------------------------------------------------------------

46.white dragon=

-STEP 1.

For the first step what you will be doing is drawing out the head shape for the dragon, and then make a neck line like so. At the bottom of the line you just drew, draw another shape for the body. Next, draw the long curled guideline for the tail, and then draw in the wing guides.

 

-STEP 2.

The second step is to get the dragon's entire head and snout drawn in. Start by making a straight forehead lining, and then draw the open jaw as well as the serrated lining for the teeth inside. Make the pointed frills on the back of the head like so.

-STEP 3.

You will now draw in the eye, but as you do this, you will need to darken the area around the eye for added detailing and texture definition. Sketch in the definition for the frills, and then draw the teeth, as well as the long thin, curled up tongue. Sketch in a nostril, and then move to step four where you will tackle more of this white dragon.

-STEP 4.

Draw the shape of the long neck like so, and then incorporate the lining to create the arm and talon or fingers. As you can see the arm is sort of stubby and curled in.

-STEP 5.

Continue with the lining until the back, butt, and stomach. Notice how the lower part of the body or stomach sinks inward, this is because I was going for a snake like dragon. Draw the legs and exaggerated sized feet, and then add some minor detailing to the body or limbs.

-STEP 6.                 

Continue drawing the body until the tail is drawn in a snake like manner. You will also need to draw the other leg like so, and move to step seven.

-STEP 7.

For step seven, all you have to do is draw the other arm, and then draw in the bone for the arm of the wing, and then move to step eight.

-STEP 8.

Instead of drawing a skin based wing, I went ahead and draw a feather based wing. Draw three layers of feathers like so, and then draw in the detailing all over the feathers for added texture and definition.

-STEP 9.

Okay, I also wanted to draw in some feathery strands of hair in a downward flow, and then draw the other wing on the opposite side.

-STEP 10.

Sketch in the stomach detailing by drawing the scales up and down the body and tail, and then sketch in the body detailing along the side of the body, the legs and on the nails. Clean up the drawing and you are all done.

-STEP 11.

Here is the finished line art when you are all done. Color in your new dragon and move onto something new.

47.ghost dragon=

-STEP 1.

First, let's start with the essential guidelines that will form he basis of the body. You'll want to draw these as accurate as possible or maybe skip them if you feel brave enough. Use varied circles and try keeping them from relating in size. Also note to draw these guides LIGHTLY and your future lines if you want to consider having neat lines.

-STEP 2.

Then, we will start forming our dragon by starting with the head FIRST. I cannot stress enough that by starting with the head is extremely helpful. Not only does it proportion the body easily, but it will credit your drawing speed in the future. Our dragon has lots of angular shapes since he IS a beast of fury and deathly gallows ;)

- STEP 3.

Let's finish the head by sketching the facials, which have a pattern smothered around the eye. This gives the dragon a ghastly appearance of tire and ware. Use light lines for further detailing in the horns and teeth. You don't want to use the same line weights constantly. It will distract attention from the overall focal point of the dragon.

- STEP 4.

Let's get risky and challenging by drawing the entire neck and the shape of the back. I do this because of the ease at drawing the rest of by body by establishing a defined area to place your future lines. Sketch lightly, and try not to stray from the grayed guidelines. Trust me, they help.

- STEP 5.                    

We'll engage ourselves into creating the arms and fingers for this creature. You'll want to start with the base of the arm first, then work your way onto the fingers first, regardless of the details. First comes the shape, THEN the detail.

- STEP 6.

Look at our success! Next, time to draw the leg. Now this may look intimidating, but it isn't once you've start sketching. Draw the underbelly first and then the beginning arch of the leg. Keep your distance and measure the width of the leg/toes compared to the arm. You don't want to have a huge leg and small body.

- STEP 7.

Finish the rest of the legs and the spiral of the tail. You can go all crazy on the flames, perhaps add your own zest to it. It all depends on your skill level with drawing dragons.

- STEP 8.

Time to sketch the basis of the wing by starting with the arch of the wing arm and eventually the overlapping fingers/membrane. I like to draw my wings overlapping to add diversity and motion to the creature. Remember to use angular shapes for most of the these lines.

- STEP 9.

Then, finish off the wing, keeping in mind that because this dragon is of the undead, you'll have to sketch ripped and torn wings. Maybe you can use this feature on the rest of the body. Maybe torn limbs or ripped flesh. I wanted to keep this simple for all you avid dragon artists!

- STEP 10.

Let's simply draw the background wing, using light lines for definition. That wasn't so hard!

- STEP 11.

Lastly, using VERY LIGHT lines, detail the belly with thick plated scales. This is essential for this guy, since it will ad contrast and depth to the overall drawing.

- STEP 12.

With further improvement on the proportions, line art, and careful observation, you should have something like this. If not, then redraw using the tutorial, or add your own little twist. I hope you guys enjoyed another addition of a dragon tut. Thanks so much for viewing and don't forget to leave your suggestions for the next mythical drago!

----------------------------------------------------------------------------

48.anthro dragon=

- STEP 1.

First, let's begin by drawing the essential guidelines that build the form and proportions of this anthro. I would prefer drawing the head circle first, then the midsection. Take your time with this procedure to enlighten your luck with success.

- STEP 2.

Then, let's draw the top of the head, keeping in check of the various shapes that curve around the shapes. Sketch through this lightly until you've got a first draft.

- STEP 3.

Next, let's sketch the regions of detailed horn, nostrils, and eye which is slightly cartoony. Start the jaw by drawing the first lip then the outer one that surrounds it. This way, you'll have a better insight on the jaw form.

- STEP 4.

Sketching the neck, carefully sketch the muscles that form around the neck and the shoulders. Stop drawing after you've finished the chest, which is rather empty in the middle in place for the arm.

- STEP 5.

Taking a deep breath, let's sketch the arm that overlaps the chest, rather than the arm that's to the right. Make the fingers almost dinosaur-like but still somewhat humanoid.

- STEP 6.

Shifting our expertise of attention to the pelvis and legs; let's keep the outlines bold. Use light line weight for the inner details formed around the shapes, defining muscle on the dragon.

- STEP 7.

Once again, take a deep breath and prepare to draw the feet and claws inclining into the thighs. I suggest drawing the left side first, mainly because it's easier to handle. Keep the claws sharp, similar to a dinosaur or chicken foot. Detail the ridges with light scales to add heavier composition. Once you've completed the legs, sketch the tail. At this point, it should be easy.

-STEP 8.

Let's start off with the left wing first, practicing the process to make drawing the right wing easier. Never draw too much random regions! It will confuse you from drawing the wings equally. Finish by drawing the right wing, using light line wights for the wing fingers.

-STEP 9.

Enclose the wings by drawing the four major finger points on the wings. The reason we draw only four wing fingers/membrane sections, is because the wing finger at the top sums to five fingers, similar to a human. I'm adding half of human and half of dragon into this tut.

-STEP 10.

Lastly, using light line weight, draw the scales that detail the underside of the dragon. For example, the neck, chest, thighs and the underside of the tail. This add a melodic look of a reptilian creature and human.

-STEP 11.

With further proofing your draft, you're ready for inking! Ink your drawing with either Micron pens or markers to result with bold and clean lines similar to the ones above. I hope you've enjoyed this lesson, thank you so much for viewing! Peace and love!

 

49.light dragon=

-STEP 1.

Make a simple circle for the head and then draw out the long, curled line for the body. This is also going to be the pose that the light dragon is going to be in.

-STEP 2.

Now begin sketching out the actual head shape of the dragon which is oblong in size. The horns and ears should also be drawn in too. I'm sort of basing this dragon on the Chinese version, which is why there is the mustache.

-STEP 3.

Okay, here is where the challenging fun starts. You have to draw in the eyes, nose, and mouth and then draw in the inner ear detailing. Next, draw out the long serpent shape of the neck like so, and then you can add the simple whiskers.

-STEP 4.

Now you can draw out more of the light dragon's body, and then draw out some of the chest, and the first arm. Make the claws and then draw in the soft flowing mane that is trailing down the back of the head and body.

-STEP 5.

Draw more of the slithering body and then when you get to the end of the body, start turning the tail inward. Make some marking lines for the belly.

-STEP 6.

Draw out the other arm and talon, and then draw in the skin padding on top of the hand or arm.

-STEP 7.

Now you are finally ready to finish this tutorial by drawing out the tail and tuft at the end. Erase the mistakes, as well as the guides that you made in step one, and then you are all done and ready to go.

-STEP 8.

Here is the finished line art when you are done with your light dragon drawing. I hope this is what you expected, and be sure to let me know what you think by rating commenting, and faving.

50.shadow dragon=

-STEP 1.

First begin with the basic guidelines for your dragon, by starting with three simple circles that vary in sizes. The largest circle acts like the frame for the chest, same goes for the circles for the head and back area. It's best to get these guidelines as accurate as possible for proportion issues.

-STEP 2.

Next, we'll start off with the simple shapes of the dragon's head, which looks very much like a throne (something I wanted to emphasize to give power to thise shadowy dragon). The face is slender but bulky at the same time, to retain some kind of strength.

-STEP 3.

Then, we will finish off the facials while using light line work to keep variety within this creature. Take your time my fellow artists!

-STEP 4.

Let's work our way to finishing the neck off so we can prosper to the torso. The neck should be slim but believable enough to glue the body together believably. Make sure the frills are drawn correctly as well. Adding torn areas will only make the dragon deathly and shadowy.

-STEP 5.

Now, we're going to work on the torso which is butted outwards to emphasize power but also devine shadows. Make sure you sketch the attaching arm correctly so it looks belivable anatomy wise. I had fun with this part!

-STEP 6.

Next, we'll sketch out the backing as well as the tail which is curling upwards beneath his chin. This is also a key point of 'mischevious' attitiude.

-STEP 7.

We'll sketch the rest of the limbs, getting ready to sketch the large wings. Wouldn't it be cool to see this dragon in flight? I know it would for me! Again, having torn areas will only convey a creepier and dark presence.

-STEP 8.

It's time to sketch the huge, structured wings which support the flight of this dragon. Do not draw them too large or too small, it has to be just right to make the flight believable. Take your time, and refrain from rushing!

-STEP 9.

Lastly, we'll finish off the wings by sketching a few details as well as the second wing and the membrane. Take your time to evaluate where to place the ripped regions.

-STEP 10.

With prior cleaning up, proportion check and other proofing, you should have something similar to this. Make sure before you ink the dragon out, that you use a great tool like Micron pens or black markers (art markers *copics* not kiddy kinds). Anyways, I hope you've enjoyed this lesson, thanks for viewing!

51.sandwitc =

-STEP 1.

The first thing you need to draw is the shape of the bread slice. It's in rectangle form so you might want to grab a ruler to draw in the lines if you have a problem with making straight lines. The left lower corner of the bread has a slanted notch. Add one guide.

-STEP 2.

Using the funky shape you drew in step one, begin sketching out the actual shape of the slice of bread. This is a regular slice, and if you follow the steps image you should also have a drawing like the one you see here.

-STEP 3.

Believe it or not, but you will be drawing the face on this piece of bread right now. Start with the jellybean shaped eyes and then draw the mouth.

-STEP 4.

You will now draw out the first layer of yummy goodness. This can be lettuce, meat, or even a few tomatoes. For me I choose for it to be salami and a tomato slice.

-STEP 5.

Now you will draw out the cheese slice and like I said in the description, it is a piece of Swiss. I know the coloring shade is yellow, that is only because the sandwich would have looked funny with a white piece of cheese. Draw in the holes and move to step six.

-STEP 6.

Now comes the lettuce and notice how the edges are jagged. Draw this in, and move along still.

-STEP 7.

Draw in the final piece of bread and tweak the food a bit. Clean up the drawing and you are all done.

-STEP 8.

When you done you should have yourself a tasty sandwich like you see here. Color it all in and show someone what you have drawn.

----------------------------------------------------------------------------

52.ice dragon=

-STEP 1.

Make a few circles, one for the head, another for the body, and then draw one more shape for the very end of the body.

-STEP 2.

You will now begin sketching out the actual structure of the dragons head, face, horns, and the neck. Make some of the chest too. The lining as you can see is a bit bumpy and has a few angles. This is because the dragon is made of ice.

-STEP 3.

On the back of the dragon's neck, you will begin drawing out the spikes of ice that are supposed to be frills. Once that is done, sketch in the face which consists of an eye, snout wrinkles or folds, and some sharp overlapping teeth. Add in some detailing and definition on the neck and face, than move to step four.

-STEP 4.

You will now sketch out the right shoulder, arm and talon. As you can see the front talons of an ice dragon is much smaller than that of an earth or water dragon.

-STEP 5.

Moving forward, tome to sketch out the left shoulder, arm, and talon. Draw in the back and some of the stomach and before you leave this step, sketch in some definition on the arms and draw in the claws.

-STEP 6.

Simply take your time as you begin sketching out the right back leg and foot, and when you are done you can add detailing and definition to make it look muscular and toned.

-STEP 7.

Next, sketch out the left hind leg and foot like so, and be sure to draw in the hind leg resting on the toes. Add some detailing to the leg as well, and then move to step eight where you will move even further to completion.

-STEP 8.

Well this is the second to last step which means you will be finishing off this lesson with step nine. All that is needed here, is the creation of the first wing. This is an ice based wing but in drawing form, it looks a lot like a skin based wing. The arm and fingers are very strong looking so be sure to make them thick and hearty.

-STEP 9.

For the last step, you can first clean up your ice dragon by erasing the guides and mistakes. After that, draw in the tail, and add some detailing. Notice how the tail has angles unlike the original smooth curled tail.

-STEP 10.

When all the hard work is done, your drawing should end up looking awesome like the line art you see here. Color in your ice dragon and submit your artwork to the site for all eyes to see.

 

----------------------------------------------------------------------------

53.air white dragon=

-STEP 1.

First start with the basic essential guidelines for the dragon. It's best to try to get these guides drawing accurately as possible so you'll have a better shot proportioning your dragon sketch.

-STEP 2.

Next, draw the head, retaining a bit of the facial features with it. The horns of this dragon play a big role since I wanted a mystical and natural feel (like that of deer in a forest), also, a pair of white butterfly like designed wings. These fit perfectly with the horns if you noticed, I've added two pairs of each (wings and horns). This is called “symbolism” in artwork!

-STEP 3.

Then, we will finish off the facials by adding the rest of the horns as well as completing the mouth. Take a break before the next step, 4.

-STEP 4.

It's time to sketch the long, slender neck for this Air elemental dragon. Keep the neck in perfect proportion, having it taper into a larger torso, then flowing back to a slender shape. I like to have variety in my dragons, including line art.

-STEP 5.

Let's draw the wings! I prefer to draw the wings as the arms first, before you add the backwings. Take your time with each, since it totally depends on how accurately you draw them, comparing to the finalized image.

-STEP 6.

Next, let's finish off the torso by sketching the last wing!

-STEP 7.

Lastly, we'll complete the drawing by sketching the rest of the body. Don't worry about the tail trailing at the upper left of the body, we'll sketch that in after the main part is done. Afterwards, move onto the tail piece!

-STEP 8.

With additional cleanup and proportion proofing, you should have something similar to this. I took my time with my dragon drawing, and it's best if you do the same. I hope ya'll enjoyed this tut as much as I had creating it. Thank you so much for viewing and stay tuned for my other elemental dragons!

----------------------------------------------------------------------------

54.earth dragon=

-STEP 1.

Begin by drawing a total of three shapes, one for the head, another for the torso or chest, and then the end one for the back or butt end. Connect the first two with a neck guide.

-STEP 2.

You will immediately start taking your time as you draw out the head, muzzle and jaw of this earth dragon. You'll want to emphasize roots of this creature, mainly because it's portraying an earthy feel. Make sure you vary the sizes of each root.

-STEP 3.

Next, we will flesh out the facial features, and the horns which are branches with sparse leaves. It's best to emphasize various chains of leaf area so it'll vary the drawing, making it more appealing. My favorite part was drawing the back of the dragon, the branches of entangled roots and a separate tree, making the Earth dragon seem as if it was submerged into the ground...now wouldn't THAT be a cool tut ;)

-STEP 4.

Let's move onto the torso area, probably a difficult part because of all the details that's cluttered into a confined space. Let's work on the chest first before we scatter to the arm, which is also similar to a tree form. Make sure you create each boulder in various sizes, to vary your drawing. I cannot stress enough the importance of variation since it really brings out the feel in a drawing. Try sketching these lines quickly so you'll have a better chance getting an accurate line.

-STEP 5.

To finish off the torso, add the other arm, keeping in mind it's comparison to the first one.

-STEP 6.

Let's finish off the back part of the body so this dragon will be standing normally ;) Create the leg first before you move onto any interior details, you don't want to draw details first then exterior work, it'll end up a mess! Once you've done that, add the tail and more boulders or rocks. Notice how I have pieces of rock shifting off the body, creating an illusion that this creature is moving.

-STEP 7.

Lastly, we will draw the tree leaves, extra branches, and the wing to complete this piece! Keep the lineart for the tree details thinner than the rest, so it will add variety to the drawing overall. The wings should also resemble wood like feel as well.

-STEP 8.

With essential cleanup and careful observation, you should have something similar to this. Now, if you want to have similar lines, make sure you ink your drawing either digitally, or traditionally (inking pens). I really hope you've got a kick outta this lesson, as much as I had making it. Thank you all so much for viewing!

----------------------------------------------------------------------------

55.dragon heads=

-STEP 1.

This is a rough sketch of how a dragon head should look when viewing or drawing it from the front. The neck is almost perfectly aligned with the jaw bones, and the eyes are almost perfectly aligned with the snout of the beast.

-STEP 2.

Here is a sketch of a dragon head drawn in a 3/4 view angle. As you can see the horns seem different and the eyes and nose still seem to be aligned.

-STEP 3.

A sketch of a dragon's head drawn from a side view profile. You can see how the characteristics of the dragons face seems to flow in a backwards motion.

-STEP 4.

These are the different types of frills that are usually seen on the heads of dragons. Of course you can choose not to sketch in a set of frills, but I almost always add them to my dragon drawings.

-STEP 5.

Now that you've seen the different types of frills you can draw on your dragon head, there is only one question to ask now, where to put the frills. You can either draw them on the head, at the snout, along the jaw, or behind the cheeks.

-STEP 6.

Before we actually start drawing the dragon head, take a look at some of these different heads that I sketched for this tutorial.

-STEP 7.

Start with a circle for the head, and then draw in the lining for the snout and mouth of the dragon.

-STEP 8.

Here in this step all you have to do is draw out the top and bottom jaws of the dragon in a very primitive or skeletal way.

-STEP 9.

Before you sketch out the sharp teeth, you will need to sketch out the shape of the dragon's eye like you see here. Once that is done you can begin drawing out the teeth in a very uneven manner. Once that is done you can color in some nostril holes.

-STEP 10.

Begin sketching out the actual structure of the dragons head like you see here and don't forget to draw out back jaw bone. You will also need to draw in some bony frills on the forehead, and a couple of small horns on the tip of the nose.

-STEP 11.

Here you will sketch out the upper angle of the dragon's mouth like you see here. When that is done you can also sketch in more of the teeth, and then add some detailing as well.

-STEP 12.

Sketch in three large horns behind the head, and then sketch out the beard as well. When that is done begin drawing out the chin under the neck.

-STEP 13.

For the last drawing step all you have to do is draw out the back of the neck, and then sketch in the stripes on the horns, and under the neck like so. Erase the lines and shapes that you drew in step one to clean up your newly drawn dragon head.

-STEP 14.

Here is your dragon head when you are all done. Now you can draw out a body, or leave it the way it is. Color in your dragon head for added detailing and texture.

 

----------------------------------------------------------------------------

56.water dragon=

-STEP 1.

As you know you will have to take your time as you go through this lesson. Begin with a circle for the head and then draw in two more shapes that are joined. Add a neck guide and move to step two.

-STEP 2.

Begin sketching out the actual shape of the dragon's head and snout. Since this is a water dragon, instead of being a fire breather, it is a water breather. The messy looking mass is the water that the dragon is spewing out.

-STEP 3.

Continue to sketch out the shape of the head, and as you can see you will do this is a very calm manner or else your water dragon is going to look funny. Draw the side of the jaw, the horns, and the fin like frills. Sketch in the eye and brow bone for added definition to the face.

-STEP 4.

Now that the head is all drawn in, you start to get the body started. Begin with the shape of the neck, and then draw the broad chest, back and some of the front legs.

-STEP 5.

To keep things simple I will break down the steps in an easy to tackle manner. Instead of drawing both arms and talons, just draw out the left one first. Once the arm, elbow, and clawed foot is drawn in you can sketch in some detailing.

-STEP 6.

Step six entails you drawing out the right arm and talon or clawed foot. There should be detailing and definition sketched in on the arm and top of the hand, and then draw out more frills in a fin like pattern.

-STEP 7.

We can now begin sketching out the very predominate wings that seem to have less wing based tissue than most dragon wings. Sketch in the detailing on the arm of the wing and then draw a hook like nail at the elbow joint.

-STEP 8.

Sketch out the back end of the dragon. This includes the back legs, and the extremely strong looking clawed feet. Try to really get this part of the dragon's body drawn right. Part of the massive effect that this element dragon displays is from the claws and back feet.

-STEP 9.

Draw the rest of the dragon's back and tail like so, and notice how the tuft at the tip or end of the tail looks a lot like seaweed. Once the tail is drawn, you can sketch out the bone like trail down the back of the neck, all the way down the tail. Sketch in the gills on the side of the rib cage, and draw the neck line. Erase the mistakes and guides to prepare this drawing for awesome color.

-STEP 10.

Here is what the line art looks like once you are all done. The fun really begins because now that you just conquered such a massive feat, you can color in the drawing.

 

57.fire dragon=

-STEP 1.

Begin by drawing out two shapes, one for the head and another for the body. Connect the two shapes with a neck line.

-STEP 2.

Now you will start drawing out the structure of the dragon's head and this should include the snout and all the pointed frills that makes up the structure of the head. Be sure to draw in the mouth wide open.

-STEP 3.

Next, it's time for the extra detailing on the face. Work on the mouth and then work your way to the eyes. Make sure you have these features drawn boxy and sharp.

-STEP 4.

Ok, this dragon has a rather short next, mainly because I wanted to emphasize it's bulkiness. I like keeping my dragons beastly and thickened.

-STEP 5.

This is probably going to be hellah difficult, like I warned at the beginning of the tutorial. I suggest you work on one arm then the other, to make things easier for you. The claws are excessively big so this beast looks massive. Try keeping keen details throughout the dragon so it looks believable an stylish.

-STEP 6.

This might be an easy step considering there isn't much detailing to the wings. Draw the arm of the wing first then work your way to the overlaying piece. Afterwards, you can sketch out the beginning of the leg.

-STEP 7.

Next, let's work on finishing the wings, which should be easier. Keep things simple and lines sharp and boxy.

-STEP 8.

Lastly, finish off by drawing the foot first, then the tail. The feet should have the same amount of toes as the front legs. Like I said, keep things sharp and bulky to exaggerate the height and strength.

-STEP 9.

With patience and care in the lines, proportions, you should have something similar to this. I had SO much fun with this dragon and might do more in this similar style. I hope ya'll enjoyed this tutorial, and like I said before, if you want more elemental dragons, let me know in the comments! Peace :)